引用本文:
【打印本页】   【HTML】   【下载PDF全文】   View/Add Comment  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1924次   下载 219 本文二维码信息
码上扫一扫!
分享到: 微信 更多
Structure of Reconstructed Cu(100) Surface Induced by Dissociative Adsorption of Gaseous Oxygen
Wei-dong Dou*,Han-jie Zhang
Author NameAffiliationE-mail
Wei-dong Dou* Department of Physics, Shaoxing University, Shaoxing 312000, China beanw.d.dou@gmail.com 
Han-jie Zhang Department of Physics, Zhejiang University, Hangzhou 310027, China  
Abstract:
The reconstructed structures of Cu(100) surface induced by O2 dissociative adsorption were investigated by low energy electron diffraction and scanning tunneling microscopy. At lower oxygen coverage, it was found that two reconstructed structures, i.e. c(2×2)-O and (√2×2√2)R45°-O are coexistent. The domain size of the c(2×2)-O structure decreased with the increasing of O2 exposure. The reconstructed structure at very small coverage was also investigated and a “zigzag” structure was observed at this stage. The “zigzag” structure was identified as boundaries of local c(2×2) domains. It was found that the strip region shows much stronger molecule-substrate interaction than that of oxygen covered regions, making it a proper template for patterned organic films. The sequence of the thermal stability was found as zigzag structure>c(2×2)>(√2×2√2)R45°-O.
Key words:  Surface reconstruction, Chemical adsorption, Scanning tunneling microscopy,Structural phase transition
FundProject:
Structure of Reconstructed Cu(100) Surface Induced by Dissociative Adsorption of Gaseous Oxygen
窦卫东*,张寒洁
摘要:
用低能电子衍射(LEED)和扫描隧道显微镜技术研究了氧气在Cu(100)表面化学吸附所形成的表面重构结构.在低覆盖度下,实验上观察到了两个有序重构的混合相,分别为c(2×2)O重构和(√2×2√2)R45°-O重构.在氧原子的覆盖度逐渐增加的过程中,c(2×2)O重构区域的面积逐渐减小.在初始氧化阶段,实验上观察到了呈条状的“锯齿”形的重构结构,这些锯齿形的结构是由相邻的局域化的c(2×2)区域的边界区域(Cu)构成的.STM实验发现,相对于其他重构区域,这些锯齿形的重构区域与有机分子之间存在更加强烈的相互作用.通过分析在不同退火温度下样品LEED衍射点的变化,研究了重构结构的热稳定性,发现三种结构的热稳定性顺序是:锯齿结构>c(2×2)O重构>(√2×2√2)R45°-O重构.
关键词:  表面重构,化学吸附,扫描隧道显微镜,结构相变
DOI:10.1088/1674-0068/23/01/18-22
分类号: